Table of Contents
As garage doors have become important to a lot of residential homes out there, the need for garage door openers came along with it.
Your garage door opener is the mechanism that makes it possible to lift your garage doors open and close with ease.
With this technology, you are even able to open and close your doors remotely.
However, just like everything else, these mechanisms have their own downsides as well.
The problem with garage door openers is that they have a very limited range in terms of signal that it is able to receive.
This means that if you are outside of the range, your remotes might not be able to function effectively or as expected.
And when this happens, it can be quite a hassle most especially to the involved parties.
So, if increasing garage door sensor range is your end goal in mind, how exactly are you able to achieve this?
Well, if you want to find out, then keep reading below.
What is a garage door opener?
Before we get into detail about the different things you can try out in order to improve your garage door sensor’s range, let us first get to know what exactly a garage door opener is.
Garage door openers are mechanical components that you can find in your overhead garage door that is responsible for lifting it open and close.
Basically, with this technology, you will no longer have to open your doors manually.
With just a click of a button or press of a switch, you are now able to do so with ease.
Your openers are able to do all this by simply having the motors drive your door’s trolleys which will, in turn, wind your torsion springs resulting in your garage doors lifted open or close.
Now, with a garage door opener, there are two main ways in which you can control or operate them.
You can either use the wall-mounted switch located outside your garage door to lift it open or you can use the remote that comes with your garage door opener.
No matter which option you end up choosing, it will still be able to do the job so this is all just a matter of preference.
With regards to your remote’s expected range, it should be able to reach around 25 feet away from your garage door opener.
How to increase your garage door opener’s range?
Aside from having your antennas upgraded, there really is no other way to increase your garage door opener’s range on paper.
This means that whatever is the range being mentioned in your opener’s specifications, it should be the maximum range capacity of your device.
If you seem to be having problems with reaching the expected garage door opener range, then there must be something wrong with either your remote or garage door opener.
Try to investigate further why exactly this is the case for you.
To help you get an idea of what these possible reasons are, here are some examples that could help you get started with:
- Low remote battery
- Signal interruptions and disruption
- Damaged garage door opener remote
If you are able to pinpoint these problems and address them accordingly, then you should be able to improve your range problem.
But exactly how can you address the different causes of sensor range problems being mentioned above?
Well, allow us to help you out.
Low remote battery
If you are having problems with your garage door sensor’s range, then most probably your remote is going low on battery or power juice.
This means that it is no longer able to achieve its previous range because of the lack of power to do so.
If this seems to be the problem for you, then lucky for you this can be quite easy to deal with.
All you need to do is have your garage door opener remote’s battery change with newer ones.
By doing so, you will surely be able to give your remote the boost it requires and thus making it possible for your remote to reach its expected range.
Signal interruptions and disruptions
If the battery does not seem to be the issue then another possible reason for your dilemma would be the presence of interruptions or disruptions between your remote and opener.
These interruptions and interruptions can block your signal’s pathway shortening the range capacity of your remote.
To confirm this suspicion, try checking around the area if there is anything that might be interrupting your garage door’s remote signal.
These interruptions are most likely in the form of heavy metals such as lead.
See around if you see anything and if you do, try removing it.
Once you do so, you should be able to work things out just perfectly fine.
Damaged garage door opener or remote
If nothing seems to be working, then it is entirely possible that there is something wrong with either your opener or your remote.
Try consulting with a trained technician that can help you out with problems like these.
Most likely, your garage door sensor’s range is being affected due to the damages on your remote or opener.
Where can you go for garage door opener repair services?
If you are starting to run out of ideas with regards to how you should deal with your garage door sensor range problem, then try consulting a trained professional.
After all, increasing garage door sensor range is not an easy feat to do alone.
Try running around for advice regarding the next best thing you should do for your overhead garage doors.
If you are looking for a garage door repair company in Austin that can help you with your sensor range problem, then you can try out Austin Garage Door Services.
Austin Garage Door Services is a garage door repair company in Austin that has been around for quite some time now.
With our experience and skill, you are assured that no matter what your garage door-related problem is, we will surely be able to help you fix it.
And when it comes to all sorts of garage door problems, there is no better company out there that can deal with it than us.
Get to know more about us by either giving us a call or visiting us at our main office located in Austin.
Increasing garage door sensor range should be no problem at all most especially if you opt to go for the best company there is — Austin Garage Door Services.
Contact us now!
