If your garage door spring has broken, you may be wondering how you are going to get your car out. The good news is that there are a few ways to do it! In this blog post, we will discuss the three most common methods for lifting a garage door with a broken spring. We will also provide tips on how to safely complete each of these tasks. Let’s get started!
The first method is to use a pair of pliers. This is the easiest way to do it, but it’s not always the most effective. If your door is very heavy, the pliers may not be able to hold onto the door for long.
The second method is to use a ratchet strap. This is a more effective way to lift the door, but it can be dangerous if you don’t know what you’re doing. If you’re not careful, you could end up dropping the door on yourself or someone else.
The third and most common method is to use a floor jack. This is the safest and most effective way to lift a garage door with a broken spring. Make sure you use a jack that is rated for the weight of your door. If you’re not sure how to use a floor jack, consult your owner’s manual or ask someone at your local hardware store for help.
Emergency Release: What is it?
In case of an emergency, such as a power outage or a broken spring, it’s important to know how to manually release the garage door. The emergency release is a feature that allows you to disconnect the garage door from the automatic opener, so you can manually open and close the door.
To use the emergency release, first, make sure the garage door is closed. Locate the emergency release handle, which is usually a red cord hanging from the center rail of the garage door mechanism. Pull the handle down and away from the door to release the door from the automatic opener. You can now manually lift the door to open it.
How to Open a Garage Door with a Broken Spring
If you need to open the garage door with a broken spring, you can do so with a few simple steps. However, it’s important to note that opening the door without a functioning spring can be dangerous and cause injury. Therefore, it’s recommended to contact a professional garage door repair service to replace garage door springs as soon as possible.
Here are the steps to open a garage door with a broken spring:
Step 1: Disengage the Automatic Opener
Before attempting to open the garage door, you need to disengage the automatic opener. You can do this by pulling the emergency release cord, which will disconnect the door from the automatic opener.
Step 2: Open the Door Manually
Once the door is disconnected from the automatic opener, you can manually open it. Stand facing the garage door and lift the door with both hands, using your legs to push upward. Be sure to lift the door evenly to prevent it from getting stuck.
Step 3: Secure the Door
After opening the garage door, you need to secure it in place to prevent it from falling. You can do this by placing a clamp or locking pliers on the track just below the bottom roller on both sides of the door. This will prevent the door from sliding down and potentially causing injury.
Step 4: Get Professional Help
It’s important to remember that opening a garage door with a broken spring is a temporary solution and can be dangerous. Contact a professional garage door repair service to replace the broken spring as soon as possible.
Cost of Garage Door Spring Repair in Austin
The cost of garage door spring repair in Austin can vary depending on the type of spring, the size of the door, and the complexity of the repair. However, on average, homeowners can expect to pay between $150 to $350 for garage door spring repair.
It’s important to note that attempting to repair garage door springs on your own can be dangerous and cause injury. It’s recommended to contact a professional garage door repair service to ensure a safe and efficient repair.
Can I replace just one garage door spring?
If only one of your garage door springs has broken, you may be able to replace it yourself. However, we recommend consulting a professional to make sure the job is done correctly. Garage door springs can be very dangerous if they are not installed properly.
If you decide to replace the spring yourself, make sure you have all of the necessary tools and know how to use them. You will need a socket wrench, a screwdriver, and a pair of pliers.
Once you have the right tools, remove the screws that hold the broken spring in place. Be careful not to lose any of the screws! Once the spring is out, replace it with a new one and reattach the screws. Make sure the new spring is installed in the correct position. If it’s not, your garage door may not open or close properly.
Replacing a broken garage door spring can be a dangerous job. If you’re not comfortable doing it yourself, we recommend consulting a professional.
How do I lower my garage door with a broken spring?
If your garage door spring has broken, you may be wondering how you are going to lower the door. The good news is that there are a few ways to do it!
The first method is to use a pair of pliers. This is the easiest way to do it, but it’s not always the most effective. If your door is very heavy, the pliers may not be able to hold onto the door for long.
The second method is to use a ratchet strap. This is a more effective way to lower the door, but it can be dangerous if you don’t know what you’re doing. If you’re not careful, you could end up dropping the door on yourself or someone else.
The third and most common method is to use a floor jack. This is the safest and most effective way to lower a garage door with a broken spring. Make sure you use a jack that is rated for the weight of your door.
Why do springs break on garage doors?
There are a few reasons why garage door springs break. The first is that they are under a lot of tension. Over time, this tension can cause the springs to weaken and eventually break.
Another reason for broken springs is because of rust. Rust can cause the springs to weakened and break over time.
If you take good care of your garage door and keep it well-maintained, you can help reduce the chances of your springs breaking. Make sure to lubricate all moving parts regularly and check for any damage or wear and tear. If you find any problems, fix them as soon as possible.
Need help with the repair? Give us a call!
FAQs
Can I replace garage door springs myself?
It’s not recommended to replace garage door springs on your own. This task requires specialized tools and knowledge, and attempting to do it yourself can be dangerous and cause injury.
How often do garage door springs need to be replaced?
The lifespan of garage door springs can vary depending on the quality of the spring, the frequency of use, and other factors. However, on average, garage door springs need to be replaced every 7-9 years.
What causes garage door springs to break?
Garage door springs can break due to various reasons such as wear and tear over time, lack of maintenance, and extreme temperatures.
How do I know if my garage door spring is broken?
A broken garage door spring can be identified by a loud bang or snap when the door is being opened or closed. Additionally, you may notice that the door is not opening or closing smoothly, or that one side of the door is higher than the other.
How long does it take to replace garage door springs?
The time it takes to replace garage door springs can vary depending on the type of spring and the complexity of the repair. However, on average, it takes about 1-2 hours for a professional garage door repair service to replace garage door springs.
Conclusion
Opening a garage door with a broken spring is possible but should be done with caution as it can be dangerous. It’s recommended to contact a professional garage door repair service to replace the broken spring as soon as possible to ensure safety and prevent further damage to the door. The cost of garage door spring repair in Austin can vary but it’s important to prioritize safety over cost and hire a professional for the repair. Remember to always perform regular maintenance on your garage door to prevent any potential issues in the future.